Distinctive ~ Fabricating ~ Solutions ©

IMET Fully-Automatic Operation H 601 AF-NC

  • Condition:
  • Manufacturer:
  • Model:
    H 601 AF-NC
  • Status:
    For Sale
Contact Us

About IMET

Since 1968 imet has been designing, engineering and manufacturing band saws, circular saws and CNC sawing machines. Over the years they have invested in their resources to develop products to meet the increasing complex needs of their customers, in compliance with the highest standards of safety and for the environment. Whether you're looking for a manually-operated, semi-automatic, full automatic, or a special application sawing machine, imet has the sawing technology you need. imet has a sawing solution to match every budget and for every demand. Wait 'till you see what we saw...

Product Details

Automatic CNC twin column bandsaw, hydraulically driven. Especially adapt to cut sections of steelwork, tubes and solids. Possibility to make cuts with variable angle up to 60° to the left.

  • Steel sawframe with tubular section; worktable supported by a central pivot with preloaded bearings.
  • Sawframe movement onto an electrowelded column of big dimension, through two recirculating ballscrews linear guides.
  • Pulley diameter 520 mm. Long-Life monobloc motoreducer.
  • Registrable band guides with hard metal pads and guided bearings.
  • Feeder 550 mm long with electric movement through recirculating ballscrews diameter 32 mm. onto linear guides.
  • CNC driver allows to set and memorize more then 99 cutting programs, with different cutting lengths and quantities. Minimal scrap-end 100 mm.
  • Electronic Inverter for variable blade speed.
  • Automatic control of the beginning and end cut through a feeler pin; regulation of the descent of the arc and strength of the penetration through the display console; mechanical tensioning of the blade with a control microswitch.
  • Sawframe canted 6° allows sawblade to freely and easily cut through the bottom of structural section without vibration, binding, or slowdown of sawing rates.
  • Tension of the blade KG. 2.300 / cm².
  • Cutting capacity at 90 °: Round 510 mm., square 480 mm. Rectangular 610 x 450.



Area angular cut ° 90 +30
Cutting capacity at 90°: round / square / rectangular mm. 510 / 480 / 610x450
Cutting capacity at 90°: rectangular with cutting bundle mm. max 600x250 min 150x50
Blade dimensions mm. 5320 x 34 x 1.1 or 5320 x 41 x 1.3 on request
Blade Motor Power KW 3 or 4 on request
Run feeder carriage (repeatable) mm. 550 / optional 1500
Power motor feeder KW 0.75
Scrap end mm. 100
Blade speed mt/min. 15 ÷ 100
Motor hydraulic unit KW 0.75
Tank Capacity of the hydraulic unit Lt 20
Capacity coolant tank Lt 100
Dimensions ( B x L x H ) mm. 2650x2800x2170
Height of the work-table mm. 820
Weight Kg 2300
Minimum cuttable length mm. 30
Type of functioning   semiautomatic/automatic CNC
Suitable for cutting:   Steel / cast iron / high-strength steels


Photo Gallery